Sparkling Water Maker w/ Carbonation Cap & CO2 Tank

Sparkling Water Making Kit for Homemade Seltzer & Carbonated Waters — Soda Stream Alternative

This home carbonating kit allows you to carbonate any beverage of your choice. Make your own sparkling water, soda, seltzer water, juice, beer or almost any other beverage you can think of using the sleek 2 liter Stainless Steel Handled-Growler. 

The kit is fully assembled and includes:

• Steel Growler with Handle and Travelling Cap (select your size from the dropdown)
• Carbonation Cap with Gas Ball Lock Post and PRV
• 5 lb. CO2 Tank (shipped empty)
• Dual gauge Taprite CO2 regulator
• Gas Hose with Ball Lock Disconnect

Carbonating sodas, seltzers, and any other beverage at home is extremely easy with this setup!  Everything you need to get started is included in this kit (all you need to do is get the CO2 tank filled - They ship empty by law). 

How to make homemade sparkling water:

1. Fill your stainless steel growler with about 3/4 (1500ML) or a little more (you just need to leave a couple of inches of airspace), and screw on the top assembly.
   Make sure the liquid is ice-cold, this will help speed up the process of carbonating. CO2 absorbs into cold liquids much better than warm or room temp. 
2. Set the pressure on your regulator to about 15PSI. 
3. Attach the ball lock disconnect to the gas-in post. 
4. Pull the pressure relief valve a few times.  This will purge out the oxygen inside the mini keg and replace it with CO2. 
5. Increase the pressure on your regulator to 30-35 PSI and begin shaking the growler.  You will hear the CO2 forcing itself into the growler. 
6. Do this for a couple of minutes - and you can shake the growler while carbonating to force the CO2 into the liquid faster.  
7. After the liquid has been carbonated, you can release the pressure from the mini keg by pulling the Pressure Relief Valve (PRV), unscrew the cap, and pour your carbonated beverage into a glass straight from the mini keg.  

Use in conjunction with our Soda Extract Flavors, or use your own soda recipe. We often use it around here to make sparkling water.

On average, customers report getting about 180 carbonated liters from a 20 oz CO2 bottle (this kit comes with a 5 lb CO2 Tank, so you will be able to carbonate much more!).

NOTE: The bottle in the photo is for illustration only, it is not included. Just use a standard 1 or 2-liter storebought soda bottle. 

Need Soda Extracts? Click HERE to Shop Soda Extracts

This is also great for carbonating sodas, and making your own homemade Topo Chico and other flavor-infused bubble waters!

How to make homemade Sparkling Water & Seltzers in the SS Growler

2L Mini Keg Dimensions:

• 8.5" Tall X 5.25" Diameter (capped growler only)
• 10.25" to the top of the ball lock post when carbonation cap is attached to the growler. 

3.6L Mini Keg Dimensions:

• 13" Tall X 5.25" Diameter (capped growler only)
• 14.75" to the top of the ball lock post when carbonation cap is attached to the growler. 

5L Mini Keg Dimensions:

• 11" Tall X 7.25" Diameter (capped growler only)
• 12.75" to the top of the ball lock post when carbonation cap is attached to the growler. 

8L Mini Keg Dimensions:

• 14.75" Tall X 7.25" Diameter (capped growler only)
• 16.5 to the top of the ball lock post when carbonation cap is attached to the growler.