MixRite SE3660ECR2 60x36 Stainless Steel Equipment Stand

The MixRite SE3660ECR2 is an 18-gauge stainless steel equipment stand built for holding heavy, hot cooking equipment on a 60" x 36" footprint. It's the size you reach for when a griddle, charbroiler, or range needs a stand wide enough to sit under it without overhang, and it gives you a full shelf underneath for the pans and pots that go with whatever sits on top. This is a commercial kitchen equipment stand meant for restaurants, catering kitchens, and other foodservice operations running equipment all day, every day.

Highlights

• Six adjustable bullet feet keep the 60 inch stand from rocking on an uneven floor.
• A hemmed edge along the sides and back keeps pans and equipment from sliding off the top.
• An H-shaped rib under the top spreads the load evenly so it won't sag under heavy equipment.
• NSF listed for commercial kitchen use.
• Ships knocked down with the tools needed for assembly.
• Backed by a 90-day workmanship warranty.

SE3660ECR2 Stainless Steel Equipment Stand Construction

• 18-gauge top: the work surface and undershelf are both stainless steel, with an H-shaped rib welded underneath the top so the load spreads out instead of sagging in the middle.
• Hemmed edges: the sides and back carry a safety hem standard, so pans and utensils don't slide off while you're working.
• Six-leg base: at 60 inches wide this stand ships with six stainless legs instead of the four legs on the shorter models in the series, since a span this size needs the extra support.
• Adjustable undershelf and feet: the shelf height adjusts to fit taller pans, and the bullet feet screw up or down to level the stand on an uneven floor.

60x36 Equipment Stand Specifications

• Exterior dimensions: 60-1/4 in W x 36 in D x 25-3/4 in H
• Net weight: 79.58 lb / Gross weight: 90.6 lb
• Gauge: 18-gauge stainless steel
• Legs: 6, with 1 in adjustable bullet feet
• NSF listed

Commercial Kitchen Equipment Stand Assembly and Warranty

The stand ships knocked down in a flat box with the tools you need to put it together, so it arrives flat rather than welded as one piece. Atosa covers the SE3660ECR2 with a 90-day workmanship warranty. If you'd rather roll the stand around than bolt it in place, a caster set (5 in wheels, 1-1/2 in expanding stem, part WA400001) is sold separately and fits this model.

Dimensions: 60-1/4"x36"x25-3/4". Material: Stainless Steel.

Specifications