MixRite SE3030ECR2 30x30 Stainless Steel Equipment Stand

The MixRite SE3030ECR2 is a 30" x 30" stainless steel equipment stand built to give heavy or hot countertop equipment a solid, level base in a commercial kitchen. It's part of Atosa's MixRite line of stainless work-surface equipment, and it's sized to sit under griddles, char-broilers, pasta cookers or any other countertop unit you don't want sitting directly on a wood or laminate table.

Highlights

• NSF certified, so it's approved for direct food-contact and commercial kitchen use.
• Holds up to 800 lbs on the top shelf and 620 lbs on the undershelf.
• Ships knocked down with all assembly tools included in the box.
• Add the optional 5-inch caster set (part WA400001) to make it mobile.
• H-shaped rib underneath the top spreads out heavy equipment loads evenly.

MixRite SE3030ECR2 Equipment Stand Features

• All-stainless build: the top, undershelf, hat channel, legs and sockets are all stainless steel, so nothing on the stand rusts or pits from daily washdowns.
• Safety hemmed edge: a raised lip runs around the sides and back of the top to keep pots, pans and equipment from sliding off.
• H-shape reinforced rib: a brace under the top spreads out heavy, concentrated loads instead of letting the surface flex under a hot griddle or fryer.
• Adjustable undershelf and feet: the undershelf gives you a second tier for pans and supplies, and the bullet feet adjust so the stand sits level even on an uneven kitchen floor.

30x30 Stainless Steel Equipment Stand Specifications

• Exterior dimensions: 30-1/4 in W x 30 in D x 25-3/4 in H.
• Gauge: 18-gauge stainless steel.
• Net weight: 38.36 lb (gross weight 43.65 lb).
• Weight capacity: 800 lb on the top shelf, 620 lb on the undershelf.
• Certification: NSF listed.

Setting Up This Equipment Stand for Your Kitchen

It ships knocked down to keep freight costs down, and every tool you need for assembly is packed in the box. Once it's put together, the legs and feet adjust so the top comes out level even when the floor underneath isn't.

Need to move equipment around instead of leaving it fixed in one spot? The optional caster set (5 in H, 1-1/2 in expanding stem, sold as a set of four, part WA400001) bolts onto the same legs and turns this into a rolling stand.

MixRite Equipment Stand Warranty

Atosa backs the SE3030ECR2 with a 90-day warranty on workmanship, covering defects in materials and construction. It's part of a matching 30-inch-deep series that also comes in 24, 36, 48 and 60 inch widths, so you can match the stand to whatever's sitting next to it.

Dimensions: 30-1/4"x30"x25-3/4". Material: Stainless Steel.

Specifications