Line Cleaning Chemicals

Cleaning your draft beverage lines only works if you are using good cleaning and sanitizing chemicals.  

To ensure a properly cleaning beer or soda line, make sure to use the right line cleaning agents and follow the manufactures directions.  Most line cleaning chemicals are an acid base which will help break down any build up in your lines.  Make sure to flush any chemicals out of your lines with a water or sanitizer rinse prior to serving your draft beverages.

Elevate Your Beer Quality with Our Beer Line Cleaning Chemicals

When it comes to serving exceptional draft beer, cleanliness is paramount. Ensure that your customers or patrons enjoy the best-quality beer possible by investing in our premium beer line cleaning chemicals and cleaning equipment.

Why Choose Our Beer Line Cleaning Chemicals?

Our beer line cleaning chemicals are specially formulated to maintain the highest standards of hygiene and taste in your draft beer service. Here's why they stand out:

1. Pristine Beer Lines: Our cleaning chemicals are designed to remove residue, yeast, and bacteria that can accumulate in beer lines, ensuring a clean and clear flow for your beverages. Unclean beer lines result in off-flavors in your beer.
2. Enhanced Flavor: By eliminating contaminants and build-up, our cleaning solutions help preserve the original taste and quality of your beers, ensuring that each pint is as delicious as the last and being delivered to you or your customer just as the brewer intended.
3. Easy to Use: Our cleaning products are user-friendly, making it simple for your staff to maintain the cleanliness of your beer lines, taps, and associated equipment.
4. Reliable Results: Trust in our beer line cleaning chemicals to consistently deliver reliable results, giving you the confidence that your customers will receive the best possible beer experience.

Pair Our Beer Line Cleaning Chemicals with Our Cleaning Equipment:

For optimal results, pair our beer line cleaning chemicals with our high-quality cleaning equipment. Together, they create a powerful combination to keep your draft beer system in top condition.

Elevate your beer service to the next level with our premium beer line cleaning chemicals. Trust in our expertise to help you maintain the freshness and quality of your draft beer, ensuring satisfied customers and repeat business.

Why Brewers Use Petrol-Gel

• No taste or smell. It won't taint beer, cider, coffee or anything else on draft.
• Stays put. It resists water, so it doesn't rinse off during cleaning.
• Handles cold and heat. McGlaughlin rates it for 0°F to 185°F, with a melting point of 195°F.
• Food-contact rated. McGlaughlin lists Petrol-Gel as USDA H-1 rated and FDA approved for use where incidental food contact can happen.

Where to Use It on a Draft System

• Keg lid O-rings and the large lid seal
• Ball lock and pin lock post O-rings
• Gas and liquid disconnect O-rings
• Coupler and probe seals
• Faucet shaft O-rings, coupling washers and moving parts
• Valves, gaskets and fittings on brewing and serving equipment

How to Apply It

Clean and sanitize the part first, then rub a thin film onto the O-ring or seal with a clean finger. A little goes a long way. Too much can trap debris, so wipe off any excess before you reassemble. Reapply whenever you replace O-rings or deep clean your kegs and faucets.

Petrol-Gel comes in 4 oz tubes, sold one at a time or by the case.