This Duotight fitting is for joining two pieces of EVABarrier hose or rigid tubing together.
Duotight fittings feature a dual oring design that give you a better, more reliable seal.
Keep the following in mind when using Duotight fittings:
- You need to cut your hose straight (not at an angle) and firmly push the hose into the fitting until it locks in place.
- If you need to remove the hose, but pull back on the collet.
- Can be used with liquid or gas. Made from acetal plastic and the orings are made from EPDM, which is chemical resistant.
- Do not use with chlorinated cleaning solutions including bleach. This will degrade the plastic.
- No clamps are used. The hose is clamped internally by the collet and orings.
- Temperature rated to boiling (212) and pressure rated to 150PSI.
Draft Equipment/Hardware/Duotight Fittings;Draft Equipment/Hardware/Duotight Fittings/8mm Fittings
Duotight Push-In Fitting - 8 mm (5/16 in.) Joiner
Scroll to view product options.
| Item / Part # |
Price |
|
Duotight Push-In Fitting Union - 8 mm (5/16 in.) Joiner
DUOT-0108
|
$3.49 |
Add to Cart |
Scroll to view product options.
FAQs Duotight Push-In Fitting Union - 8 mm (5/16 in.) Joiner
Have a question about this product?
Others probably do too! Ask a question and we'll follow up with you individually. If your question is added to our FAQ section, it will remain anonymous.
Be the First to Ask a Question
Other Resources