Cleaning Kegs

Our commercial grade cleaning kegs feature a removable lid (like a Cornelius keg), which allows you to easily fill with cleaning, sanitizing solution, or other liquid.  

The out-ports on the cleaning kegs can be used with any type of coupler spear, sanke D, M, G, A, U, S, Etc. Simply replace the Sanke Valve Spear for the coupler type you are trying to attach to the cleaning keg.

Our Cleaning kegs are manufactured by A.E.B. an ISO 9001 certified company manufactured in Italy for over 20 years. These quality kegs have been the benchmark in kegs amongst brewers.

Not sure what type of valve our coupler you have or need? No problem! Take a look at our Keg Couplers and Keg Valves Diagram for Easy Identification.

Why Brewers Choose Haynes

• Made for food contact. Haynes lubricants are NSF registered for incidental (H1) or direct (3H) food contact, or both.
• Certified. Kosher and Halal certified, and made from FDA-accepted ingredients.
• Brewery roots. Haynes is a member of the Brewers Association and the American Homebrewers Association.
• Women owned. Haynes is a WBENC-certified women-owned business.

Where to Use It on a Draft System

• Keg lid O-rings and the large lid seal
• Ball lock and pin lock post O-rings
• Gas and liquid disconnect O-rings
• Coupler and probe seals
• Faucet shaft O-rings and moving parts

How to Apply It

Clean and sanitize the part first, then spread a thin film over the O-ring or seal. A little goes a long way. Too much can trap debris, so wipe off any excess before you reassemble. Reapply whenever you replace O-rings or deep clean your kegs and faucets.