Atosa Spiral Propeller for PPG-22 Meat Grinder - PPGP2205

This is the Atosa PPGP2205 spiral propeller, a genuine OEM grinder-head part for the Atosa PrepPal PPG-22 meat grinder. It sits in the grinder head between the blade and the drive shaft, on the same stack as the plate and blade.

Highlights

• Genuine OEM Atosa spiral propeller, part number PPGP2205.
• Fits the Atosa PrepPal PPG-22 (#22) meat grinder.
• Sits in the grinder head between the blade and the drive shaft.
• The PPG-22 is a 1.5 HP, 115V grinder rated at 450 lbs per hour.

Spiral Propeller for Atosa PPG-22 Fit and Specs

• Fits: Atosa PrepPal PPG-22 (#22 meat grinder)
• Part number: PPGP2205
• Part name: Spiral Propeller

For reference, the PPG-22 is a 1.5 HP, 115V/60Hz single-phase grinder rated at 450 lbs per hour with a blade speed of 170 RPM.

The PPG-22 and the smaller PPG-12 each have their own spiral propeller, so match the part number rather than the grinder size name. PPGP2205 is the PPG-22 part. The PPG-12 uses a different number. Check the model number on your grinder's nameplate before you order.

If the spiral propeller is the part you are replacing, pull the grinder head apart following the manual's cleaning and reassembly steps, and look at the neighbouring blade and plate while you have it open. Atosa recommends only PrepPal attachments on this grinder, and this one is an original Atosa part.

Atosa OEM Part. This part only works with Atosa brand equipment. Please contact our sales department to confirm it fits your machine before ordering. This product is not returnable.

Specifications