Atosa MixRite MWSSE184874 18x48 4-Shelf Epoxy Wire Shelving Kit, Slate Gray

The Atosa MixRite MWSSE184874 is an 18 x 48 x 74 inch epoxy wire shelving kit with four shelves, built for commercial kitchens, walk-in coolers, freezers, dish rooms and dry storage. It's finished in slate gray epoxy, so it stands up to damp and humid conditions where bare wire would start to rust.

Highlights

• Four 18 x 48 in shelves give you 4 levels of storage in a unit that's 74 in tall.
• Each shelf is rated for 450 lb, enough for cases of dry goods and boxed product.
• Backed by a 15-year rust and corrosion warranty.
• Double locking sleeves and four split posts come with the kit.
• Optional collar casters (MWSC5) and S-hooks (MWSSH01) can be added later.

Atosa MixRite MWSSE184874 Epoxy Wire Shelving Kit Features

• Epoxy coating: a corrosion-resistant slate gray finish for wet or dry areas.
• Four shelves: 18 in deep by 48 in wide, so you get four levels of storage in a 74 in tall unit.
• Four split posts: 74 in posts, with double locking sleeves included in the kit.
• Open wire design: air moves freely around stored product, which helps in refrigerated spaces.
• NSF listed: approved for foodservice use.

Wire Shelving Capacity and Dimensions

Each shelf is rated for 450 lb. That's a solid load for cases of dry goods, cans, smallwares and boxed product, but spread heavy items out instead of stacking them all on one shelf.

• Model: MWSSE184874
• Exterior dimensions: 18 in D x 48 in W x 74 in H
• Shelves: 4
• Weight capacity: 450 lb per shelf
• Finish: slate gray epoxy

Cooler and Dish Room Shelving Built for Wet Areas

Epoxy wire is the usual choice for walk-ins, freezers and anywhere that gets washed down or runs humid. The coating protects the steel from moisture, and the open shelves let air circulate and water drain instead of pooling.

The 18 in depth keeps narrow aisles usable, and the 48 in width fits a lot of storage into a small footprint. Shelf height can be adjusted in 1-inch increments, so you can set the levels to suit your product.

Accessories and Warranty

Double locking sleeves (MWSLS01, 20 per pack), collar casters (MWSC5) and S-hooks (MWSSH01, 8 per pack) are available as optional add-ons if you want to customize the unit or make it mobile. The shelving is backed by a 15-year rust and corrosion warranty.

Dimensions: 18"D x 48"W x 74"H. Shelves: 4. Finish: Slate Gray Epoxy.

Specifications