Atosa MGF8414GR 60-Inch Worktop Freezer with Backsplash

Atosa MGF8414GR is a 60-inch two-door worktop freezer with backsplash built for kitchens that need frozen storage right at prep height. It pairs a full stainless steel work surface with 17.2 cubic feet of freezer capacity underneath, so a cook can pull product and prep on the same station instead of walking to a separate reach-in across the kitchen.

Highlights

• Holds 17.2 cubic feet of frozen storage across two sections.
• Runs on a 1/4 HP compressor with environmentally friendly R290 refrigerant.
• Draws just 2.6 amps on a standard 115V/60Hz outlet.
• Backed by a 2-year parts and labor warranty plus 5-year compressor coverage.
• Rolls on 4-inch casters for easy repositioning during cleaning.
• ETL listed and built to UL 471 and CSA C22.2 No. 120 standards.

MGF8414GR Worktop Freezer Features

• Stainless steel worktop: A reinforced 60-inch top with a foamed-in-place 4-inch backsplash resists dents and keeps spills off the wall behind it.
• Two-door freezer base: Self-closing doors hold open at 90 degrees or more when you need both hands free, then swing shut on their own.
• Magnetic door gaskets: Keep the cold in and cut down on how often the compressor has to cycle back on.
• Digital temperature control: An electronic controller holds the cabinet between -8°F and 0°F.

60-Inch Worktop Freezer Specifications

• Exterior dimensions: 60-1/5 in W x 30 in D x 39-4/5 in H.
• Capacity: 17.2 cu ft across 2 sections with 2 shelves.
• Electrical: 115V/60Hz/1Ph, 2.6 amps, 1/4 HP compressor.
• Refrigerant: R290.
• Net weight: 242 lb, gross weight: 290 lb.
• Rolls on 4-inch casters.

Built for High-Volume Kitchen Prep Lines

This is the model to reach for when a restaurant, bar, or commissary kitchen needs a dedicated prep station with frozen backup right underneath it, not just a spot to set pans down. The rear grate keeps airflow clear so the compressor isn't fighting for ventilation on a tight cook line.

MGF8414GR Warranty and Certifications

Atosa backs the MGF8414GR with a 2-year parts and labor warranty plus a 5-year warranty on the compressor. The unit is ETL listed and built to UL 471 and CSA C22.2 No. 120 standards.

Dimensions: 60-1/5" W x 30" D x 39-4/5" H. Temperature Range: -8°F to 0°F.

Specifications