Push-In Fitting - 9.5 mm (3/8 in.) x 1/4 in. Flare

This 9.5mm x 1/4" female flared fitting is perfect for connecting to a 1/4" flared CMBecker disconnects and regulators. They have a female flair that will fit other male MFL flair fittings as well. This fitting is designed for 8mm tubing like the 4mm x 9.5mm (3/8") EVABarrier OD Tubing.  fittings feature a dual o-ring design that give you a better, more reliable seal.

Keep the following in mind when using fittings:

• You need to cut your hose straight (not at an angle) and firmly push the hose into the fitting until it locks in place.
• If you need to remove the hose, but pull back on the collet. 
• Can be used with liquid or gas. Made from acetal plastic and the orings are made from EPDM, which is chemical resistant.
• Do not use with chlorinated cleaning solutions including bleach. This will degrade the plastic. 
• No clamps are used. The hose is clamped internally by the collet and orings.
• Temperature rated to boiling (212) and pressure rated to 150PSI.

Push-In Fitting - 9.5 mm (3/8 in.) x 1/4 in. Female Flare

(Same part as Duotight Part # DUO120)