Procon Pump with Strainer - Series 1 (101A050F11AA170)

Procon Pump with Strainer - Series 1

These Procon® Rotary Vane Fluid pumps are readily used in many of our draft line cleaning pumps.  

All pumps have a nominal speed of 1,725 RPMs, a maximum discharge pressure of 250 PSI, and clockwise rotation. Series 1 Pumps feature a brass body and are designed for operating flow rates of 15 GPH to 140 GPH.  The pumps have the protection of a 100-mesh wire screen strainer on the inlet with a removable cap, which allows you easily open and clean periodically to make sure your pump always runs smoothly. 

Procon Pump Model # 101A050F11AA170

Details:

• Consistent flow rate across variable pressures
• Self-priming (water) and maintenance-free with low vibration and pulsation characteristics
• Internal Relief Valve Standard-Non External adjust the configuration
• Integral Strainer for debris removal from pumping fluid
• Brass Housing Material
• NPT 3/8" Inlet and Outlet Connections
• Constructed with EPDM/Nitrile Elastomers
• Flowrate of 50GPH (150LPH)*
• Fluid Operating Temperature of between -4°F to 160°F (-20°C to 71°C)
• Maximum Mechanical Horsepower required 0.33hp (246W)¹

* GPH rating at 1725RPM/60Hz and LPH rating at 1450RPM/50Hz
¹ Mechanical Horsepower requirement based on pump tested with water at room temperature and maximum operating pressure 250psi (17.5BAR)

Scroll to view product options.

Scroll to view product options.

Help other customers

Have a question about this product?

Others probably do too! Ask a question and we'll follow up with you individually. If your question is added to our FAQ section, it will remain anonymous.

Other Resources

Replacement Parts:

Fits These Applications: