Euro Style Self Closing Faucet with Flow Control, SS Spout & Shank

This European-style self-closing beer faucet gives you direct control over pour speed and foam. The built-in flow control knob lets you dial in the beer path for different styles—tightening it for high-carbonation lagers or opening it up for heavier stouts—without changing your regulator settings. A spring-loaded lever snaps shut when you release it, so you don't leave a dripping tap unattended during busy service.

The spout and shank are 304 stainless steel. That keeps the beer path inert and easy to clean, and it holds up to repeated caustic and acid line cleaning cycles. The extended spout geometry sends beer down the side of the glass instead of straight into the bottom, which cuts excess foam on pour-in and reduces waste when you're filling growlers or pitchers. It mounts to any standard beer faucet shank or draft tower with a standard rear thread, so you can swap it onto an existing tower without adapters.

Key Specs and Build Details

• Flow control: Integrated rear compensator with external adjustment knob
• Spout and contact path: 304 stainless steel
• Closure: Spring-loaded self-closing lever
• Mounting: Fits standard beer faucet shanks and draft towers
• Certifications: cULus, NSF/ANSI 18

Flow control faucets are useful when you're pouring multiple beer styles off one system, or when line length and temperature aren't perfectly balanced. Instead of chasing every pour with the regulator, you fine-tune at the faucet. The self-closing lever is also practical in shared or high-traffic setups—home kegerators, taprooms, and restaurant bars—where a handle left open can empty a keg or flood a drip tray. Wipe the spout after service and run your normal cleaning regimen through the faucet body; the stainless path doesn't hold flavor or odor between batches.

Install it the same way you would a standard faucet: thread onto the shank, orient the flow-control knob where you can reach it, and check for leaks at the coupling nut. Once beer is flowing, set the flow control so the pour fills a pint in a controlled stream with a reasonable head. Small adjustments at the faucet often fix foamy pours that aren't caused by temperature or pressure alone.

Highlights

• Adjustable flow control lets you tune pour speed at the faucet.
• Spring-loaded lever closes automatically when released.
• 304 stainless steel spout and beer path for clean, inert contact.
• Extended spout directs beer down the glass wall to reduce foam.
• Mounts to standard beer shanks and draft towers.

Specifications