Atosa Mixer Motor (110V/60HZ) for PPM-30 - PPM3008

The Atosa PPM3008 is the 110V/60HZ mixer motor for the Atosa PrepPal PPM-30 planetary floor mixer. It is the drive motor that turns the mixer's planetary shaft and the attachment on it, so it is the part to order when the original motor in your PPM-30 needs to be replaced.

Highlights

• Genuine OEM Atosa mixer motor, part number PPM3008.
• Fits the Atosa PrepPal PPM-30 planetary floor mixer.
• Rated 110V at 60HZ, so it runs on a standard 110V supply.
• Replaces the drive motor that turns the mixer's planetary shaft.

Mixer Motor for Atosa PPM-30 Fit and Specs

• Part number: PPM3008
• Fits: Atosa PPM-30 planetary floor mixer
• Voltage: 110V
• Frequency: 60HZ
• Quantity per mixer: 1

To confirm the fit, match the part number PPM3008 and check that the model number on your mixer is PPM-30. The PPM-10 and PPM-20 mixers use their own motors, so do not order this one for those models. The voltage has to match your mixer's nameplate rating, and this motor is the 110V/60HZ version.

Before you order a motor, check the simpler causes. If the mixer will not run, make sure the bowl guard is fully closed, the bowl is raised to its highest position, the timer is set, and the internal overload has been reset with the stop button and then the reset button. If the overload keeps tripping, a smaller batch size is the first thing to try.

This is a genuine OEM Atosa part. Motor wiring should be handled by a licensed electric technician, and after the swap it is worth checking that the planetary shaft turns in the direction of the arrow marked on it.

Atosa OEM Part. This part only works with Atosa brand equipment. Please contact our sales department to confirm it fits your machine before ordering. This product is not returnable.

Specifications