Atosa CookRite ATG-6024-C 60" Thermostatic Chrome Griddle, 150,000 BTU

The Atosa ATG-6024-C is a 60" thermostatic chrome plated countertop gas griddle built for restaurant, diner and catering line cooks who need a big, even cooking surface. It runs five 30,000 BTU burners for 150,000 BTU total, each with its own thermostat.

Highlights

• The 1" thick chrome plated griddle plate keeps radiant heat down in the kitchen and helps food release cleanly.
• Five independent thermostatic controls let you run each 12" section anywhere from 200 to 450 degrees F.
• Each U-shaped burner puts out 30,000 BTU, for 150,000 BTU across five burners.
• Standing pilots shut the gas off automatically if a pilot goes out.
• The protruding front edge and 12-3/4" working height keep operators farther from the hot plate.

Atosa ATG-6024-C Chrome Plated Griddle Features

• Chrome plated plate: the 1" thick plate cuts radiant heat into the kitchen and reduces food sticking and flavor transfer.
• Independent thermostats: every 12" section has its own control, so you can hold eggs at one temperature and burgers at another.
• U-shaped burners: 30,000 BTU per 12" section, with standby pilots.
• Safety shutoff: standing pilot ignition shuts off the gas if the pilot goes out.
• Stainless construction: stainless exterior and interior, with 2mm thick, 14-ga stainless rear and side splashes.
• Grease drawer: a stainless drawer, 6-3/4" W x 17-1/2" D x 2-1/2" H, holds 4 quarts.

60-Inch Thermostatic Gas Griddle Specifications

• Cooking surface: 60" W x 24" D
• Overall size: 60" W x 32" D x 15-1/4" H
• Burners: 5 independent, 30,000 BTU each
• Total input: 150,000 BTU/h
• Gas: natural gas (4" W.C.) or propane (10" W.C.)
• Temperature range: 200 to 450 degrees F
• Working height: 12-3/4"
• Gas connection: 3/4" NPT at the rear, regulator standard
• Net weight: 536 lb

Countertop Gas Griddle Installation and Warranty

The griddle sits on stainless steel legs and needs 6" of clearance at the rear and 4" to 6" at the sides from combustible construction, depending on model. Clearance to non-combustible construction is 0".

It's ETL listed, conforms to ANSI Z83.11 and NSF/ANSI 4, and is certified to CSA 1.8. Atosa backs it with a 1 year parts and labor warranty, and an extended warranty of up to 5 years is available.

At 536 pounds, plan your counter or stand before it arrives. A heavy-duty equipment stand is the usual answer for a griddle this size.

Specifications