Aluminum Foil Tape - 2" x 150'

Aluminum Foil Tape - 2" x 150'

This is the tape you reach for when you're insulating and sealing trunkline bundles on a long-draw draft system. The 2" width gives you enough coverage to wrap foam insulation tightly around your beverage lines, and the 150-foot roll means you won't run out halfway through a run.

The big reason to use foil tape over standard vinyl or duct tape on beverage systems is the adhesive. This one has virtually no odor, which matters more than you'd think. Cheaper tapes can off-gas and cause permeation through soda and beer tubing, and that shows up as off-flavors in your product. Nobody wants their draft beer or soda picking up a chemical taste because of the tape holding the insulation together.

It's self-adhesive, so there's no separate glue or activator. Peel it, wrap it, and it holds. The foil backing seals out moisture and helps hold the cold in, which keeps your glycol or product lines at temperature over long trunkline runs from the walk-in to the tower.

Where It Gets Used

In the beverage world, foil tape is a staple for wrapping insulated trunklines, sealing foam pipe insulation, and bundling multiple product lines together. Bars and restaurants running long-draw systems use it constantly. Beyond beverage, the same tape works for HVAC duct sealing, insulation seams, and any job where you need a clean, moisture-resistant seal that won't smell.

Highlights

• Low-odor adhesive won't cause permeation in soda or beer tubing.
• Self-adhesive backing—no separate glue or activator needed.
• 2" width wraps and seals foam insulation on trunkline bundles.
• 150-foot roll covers long-draw draft runs.
• Foil backing seals out moisture and holds temperature.

Specifications:

• Roll Width: 2 inches
• Roll Length: 150 feet
• Material: Aluminum foil with self-adhesive backing
• Adhesive: Low-odor, won't permeate beverage tubing

(Shurtape #Af975)

Specifications