3M ICE120-S Water Filter System for Ice Machines, 0.5 Micron

The 3M ICE120-S Water Filter System is a complete filtration kit built for commercial ice machines, pairing a valve-in-head filter body with a 3M HF20-S replacement cartridge.

Highlights

• The Sanitary Quick Change head lets you swap the HF20-S cartridge without touching the filter media or reaching for a wrench.
• Each cartridge filters up to 9,000 gallons and typically lasts 9 to 12 months before it needs replacing.
• Rated for 1.5 gallons per minute, it's sized for cubers up to 750 pounds a day or flakers up to 1,200 pounds a day.
• The 0.5 micron cartridge meets NSF Standard 42 for material safety and taste and odor reduction.
• A built-in shut-off valve and 3/8 inch FNPT connections make it a straightforward swap onto existing plumbing.

0.5 Micron Filtration Rated for 9,000 Gallons

The HF20-S cartridge inside the ICE120-S carries a 0.5 micron nominal rating and is good for roughly 9,000 gallons, which usually works out to 9 to 12 months of service depending on your water quality and how much ice you're making. At a 1.5 GPM flow rate, the system is sized for commercial cubers producing up to 750 pounds of ice a day or flakers up to 1,200 pounds a day.

• Filter media: a carbon block cartridge with a built-in scale inhibitor that cuts chlorine taste and odor and sediment, while slowing limescale buildup on evaporator plates and probes.
• Certification: filter materials meet NSF Standard 42 and FDA CFR-21 requirements.

Sanitary Quick Change Head Makes Cartridge Swaps Simple

The head has a built-in pressure gauge so you can see at a glance when the cartridge is loading up, plus a quarter-turn shut-off valve so you're not hunting for another valve upstream. The Sanitary Quick Change (SQC) design lets you unscrew the spent cartridge and thread on a new HF20-S without touching the filter media, which keeps change-outs quick and sanitary.

ICE120-S Water Filter System Specs and What's Included

• Connections: 3/8 inch FNPT inlet and outlet.
• Operating limits: maximum 125 PSI and 100F water temperature.
• Dimensions: 17 inches tall by 4 inches wide, with at least 2-3/8 inches of clearance below the head for cartridge removal.
• Included in the box: filter head with pressure gauge, mounting bracket, and one HF20-S cartridge.

Since Atosa carries this system as part of its ice machine lineup, it's a common upgrade or replacement filter for shops already running Atosa ice makers, and the SQC head design means your crew can handle the cartridge swap on the standard schedule without calling a tech.

Application: For commercial ice machines. Includes: Head with gauge, bracket, and one HF20-S cartridge. Capacity: 9,000 gallons.

Specifications